Nipper H478

H478 NIPPER FOR NAILS AND CUTICLES

The H478 nipper from HERBITAS, made of stainless steel and measuring 13 cm in length, is specifically designed to cut nails and cuticles. Its sharp tip and stainless steel construction ensure precision and durability, making it ideal for healthcare settings.

NIPPERS USAGE INDICATIONS:
This nipper is indicated for toenail cutting and cuticle removal.

TECHNICAL SPECIFICATIONS:
BRAND: Herbitas.
MATERIAL: stainless steel.
STERILIZABLE: non-sterile, sterilizable product.
WEIGHT: 63 g.
DIMENSIONS: 13 cm ± 0.5 cm in length.
TIP LENGTH: 19 mm ± 1 mm.
TIP WIDTH: open: 9 mm ± 0.5 mm; closed: 6.5 mm ± 0.5 mm.
TIP TYPE: sharp.


PRESENTATION:
Presented in a plastic case with tip protector, supplied in non-sterile conditions.

STORAGE:
Store the product in a cool, dry place, protected from direct sunlight.

WARNINGS:

• Product supplied in non-sterile conditions. It must be cleaned, disinfected, and sterilized by the user before first use and after each use.
• Keep out of reach of children.
• For exclusive use by qualified personnel.
• Perform regular maintenance and care, including a visual and functional check before each use.
• Ensure the product is completely dry after cleaning and disinfection, paying attention to crevices and recesses.
• Discard broken, damaged, or rusted instruments, as they cannot be reused or reprocessed.
  
  

CLEANING AND CARE:

• Perform an initial manual cleaning with water and neutral soap.
• Dry cleaning whenever possible; avoid long soaking periods to prevent corrosion.
• If necessary, use cold water and a soft-bristled brush.
• Dry thoroughly with an absorbent cloth, leaving no residue, and use compressed air in hard-to-reach areas.
• For disinfection, immerse in an appropriate solution and clean in an open position if the instrument has joints.
• After disinfection, rinse with cold distilled water and dry completely.
• Lubricate with protective oil before sterilization if necessary, ensuring the oil is well distributed.
• Sterilization in autoclave at 134 °C for a minimum of 3 minutes or at 121 °C for 15 minutes, according to European standards.