Moon Point Nipper

MOON TIP PLIERS, 14 CM
 
Moon Tip Pliers, 14 cm with oblique, interlocking moon-shaped tip, designed for nail care. Made of high-quality stainless steel and equipped with two springs and a smooth handle that ensures safe and effective handling.

INDICATIONS FOR USE OF THE PLIERS:

Indicated for nail care.
 
TECHNICAL SPECIFICATIONS:

• BRANDS: Dimeda / EF7-50RD
• MATERIAL: stainless steel.
• STERILIZABLE: sterilizable and reusable product.
• WEIGHT: 102 g.
• DIMENSIONS: total length of 14 cm, closed width of 5.5 cm.
• JAW LENGTH: 2.0 cm.
• TIP TYPE: moon-shaped, oblique, and interlocking tip.
• SPRING TYPE: two springs.
• HANDLE TYPE: smooth.
   

PRESENTATION:

A plastic bag with a Moon Tip Pliers, supplied in non-sterile conditions.
 
STORAGE:

• Store the product in a cool, dry place.
• Protect from direct sunlight.

WARNINGS:

• Product supplied in non-sterile conditions; must be cleaned, disinfected, and sterilized by the user before the first use and after each use.
• Keep out of reach of children.
• Use exclusively for the intended purposes by qualified personnel.
• Correct maintenance and care are essential, with visual and functional inspection before each use.
• Thoroughly dry after cleaning and disinfection, paying special attention to gaps and recesses.
• Remove and discard broken, damaged, or rusted instruments, as they cannot be reused or reprocessed.

CLEANING AND CARE :

Initial recommendations:

• Perform a visual and mechanical inspection of new surgical instruments.
• Visible dirt should be removed as soon as possible to prevent residue from drying.
• Avoid long waiting times for cleaning and disinfection of the instrument.

Preliminary manual cleaning:

• Initially, it should be hand-washed with neutral soap.
• In the operating room, visible dirt should be removed as soon as possible to avoid encrustation, which can lead to corrosion.
• Avoid long waiting times for reprocessing (<1h).
• Dry cleaning is preferable as medical products may corrode if submerged in solutions for a long time.
• If dry cleaning is insufficient, wash with cold water (< 40ºC), including cavities, grooves, and hard-to-reach holes, which should be washed with pressurized water. Avoid leaving unwashed areas. A soft-bristle plastic brush can be used.
• Thoroughly dry with a lint-free absorbent cloth or compressed air.

Cleaning and disinfection:

• Immerse the products in a solution of distilled water with an appropriate disinfectant in an ultrasonic bath or container.
• Follow the disinfectant manufacturer’s instructions for wash program, temperature, and time.
• Clean instruments with movable joints in an open position or by moving the joints to avoid “shadow areas.” Follow the manufacturer’s instructions for dismantling detachable instruments.
• Secure instruments with a minimum gap in the cleaning container and avoid overlap to prevent damage from collisions.
• After disinfection, rinse the products thoroughly with cold distilled water, paying special attention to cavities, grooves, and hard-to-reach holes, if possible with pressurized water.
• Thoroughly dry with a lint-free absorbent cloth or compressed air.

Lubrication:

• Use Sterilit Instrument Protector (ref. 13.859.1 and 13.859.2) to protect the instrument.
• Attach the provided white plastic tube with the spray and apply the aerosol oil directly to the joint area or hard-to-reach areas.
• Open and close the instrument several times to distribute the oil evenly and remove excess oil with a lint-free cloth. Then proceed to sterilize the instrument as the oil film is steam-permeable. It will act as a lubricant and anticorrosive without leaving marks on the instruments.

Sterilization:

• Sterilize products considering applicable national requirements.
• Sterilize products in suitable sterilization packaging.