Autoclave STE TYPE “B” 18 Litres

STE CLASS B AUTOCLAVE 18 LITRES

The STE Class B 18-litre Autoclave is a professional sterilisation unit equipped with an ultra-quiet vacuum pump that enables fast and efficient cycles.

It features different sterilisation programmes and operates at 121 and 134 ºC. It also includes a specific 105 ºC cycle for disinfecting plastics and allows B&D, Helix and vacuum tests to be performed.

Its LCD graphic display continuously shows information related to the sterilisation process, including temperature, pressure and equipment status. It also features visual and acoustic sensors to monitor the amount of water in the tanks.

To facilitate process recording, it includes a USB memory port for storing information and a USB port for connecting an external printer. The unit complies with the EN 13060 standard.

FEATURES:

• Ultra-quiet vacuum pump for faster cycles.
• Door with automatic locking system after the programme starts.
• LCD graphic display with continuous information on cycle progress.
• Simple and easy-to-use control panel.
• Displays pressure, temperature and autoclave status during the sterilisation cycle.
• Visual and acoustic sensors to monitor the amount of water in the tanks.
• Distilled water tank with drainage valve.
• Safety valve and door status control.
• Ventilation grille.
• USB memory port for storing process information.
• USB port for connecting an external printer.
• Allows B&D, Helix and vacuum tests to be performed.
• Complies with the EN 13060 standard.

INDICATIONS:

Suitable for the sterilisation of reusable instruments and surgical and dental materials.

AVAILABLE PROGRAMMES:

• Solid 134 ºC: sterilisation at 134 ºC and 210 kPa.
• Solid 121 ºC: sterilisation at 121 ºC and 110 kPa.
• Wrapped 134 ºC: sterilisation at 134 ºC and 210 kPa.
• Wrapped 121 ºC: sterilisation at 121 ºC and 110 kPa.
• Textile 134 ºC: sterilisation at 134 ºC and 210 kPa.
• Textile 121 ºC: sterilisation at 121 ºC and 110 kPa.
• Prion 134 ºC: sterilisation at 134 ºC and 210 kPa.
• Liquid 121 ºC: optional programme at 121 ºC and 110 kPa.
• B&D test: specific programme at 134 ºC and 210 kPa.
• Helix test: specific programme at 134 ºC and 210 kPa.
• Vacuum test: specific test programme.
• Quick 134 ºC cycle: rapid cycle at 134 ºC and 210 kPa.
• Drying cycle: specific drying programme.
• 105 ºC cycle: intended for disinfecting plastics.

TECHNICAL SPECIFICATIONS:

• Reference: 16.109.11.
• Capacity: 18 litres.
• External dimensions: 445 x 400 x 690 mm.
• Chamber dimensions: 230 x 360 mm.
• Weight: 45 kg.
• Voltage: AC 220-240 V, 50-60 Hz.
• Main fuses: F 16 A / 250 V.
• Rated power: 2000 VA.
• Sterilisation temperature: 121-134 ºC.
• Distilled water tank capacity: approximately 2.5 litres.
• Operating ambient temperature: 5-40 ºC.
• Maximum relative humidity: 80%.
• Atmospheric pressure: 76-106 kPa.
• Noise level: below 70 dB.

INCLUDED ACCESSORIES:

• Rack for four trays.
• 3 instrument trays.
• Tray holder handle.
• 2 drainage hoses.
• Door adjustment tool.
• Door gasket.

PRESENTATION:

One white STE Class B 18-litre Autoclave.

INSTALLATION:

• Leave at least 10 cm of free space around the steriliser and 25 cm above it.
• Leave sufficient space to allow the door to open fully.
• Install the unit in a well-ventilated area.
• Place the autoclave on a table capable of supporting its weight and at a suitable height for operation.
• Do not cover or block the ventilation outlets or grilles.
• Do not install the steriliser near water sources.
• Keep the unit away from other heat sources.

CLASSIFICATION:

Class IIb medical device.

MAINTENANCE:

• Daily: clean the door gasket and external surface.
• Weekly: clean the water reservoir and sterilisation chamber.
• Every 6 months: replace the bacteriological filter.
• Annually: replace the door gasket.
• Use only distilled water to help ensure correct operation and extend the service life of the steriliser.

COMPATIBLE SPARE PARTS

• STE 18 Autoclave Door Gasket (Ref. 21.260.13)
• Bacteriological Filter for Class B Autoclave (Ref. 21.260.6)
• Aluminium Tray (Ref. 21.260.14)

WARNINGS:

• Read and understand the manual before installing or using the steriliser.
• Check that the supply voltage matches that specified for the unit.
• The unit must be properly earthed.
• Do not cover or block any openings on the unit.
• Use the autoclave exclusively for its intended purpose.
• Do not exceed the maximum load specified by the manufacturer.
• Do not use the unit if the cable or plug is damaged or if the autoclave is not operating correctly.
• Do not place flammable or explosive products inside the steriliser.
• Do not use in areas where gases or other explosive volatile substances are present.
• Installation and repair work must be carried out by authorised service technicians.
• Carry out proper maintenance and periodic replacement of spare parts.

STORAGE:

• Temperature: between -20 and 55 ºC.
• Relative humidity: 85%.
• Atmospheric pressure: 50-106 kPa.

WARRANTY:

The unit is covered by a 1-year warranty, provided that the installation, use and maintenance instructions have been correctly followed and the autoclave has not been misused.