Platrix 2 Units

The Platrix plaster bandage consists of natural plaster and a support material made of a special cotton fabric. It is a non-sterile, single-use bandage for short and long-term immobilization treatment in humans using circular bandaging techniques.

Indications for Use

Indicated for short and long-term treatment with external immobilization, using circular bandaging techniques, as well as for splinting. Intended for use by healthcare professionals in clinical settings.

Medical device: Class I.

Technical Characteristics

• Elasticity: polypropylene BH374MO, a high-strength heterophasic copolymer.
• Color: N/A
• Composition: cotton gauze impregnated with plaster and polymeric binders.
• Measurements: 5cm x 2.7m; 10cm x 2.7m; 15cm x 2.7m; 20cm x 2.7m.
• Content: 2 pcs
• Immersion time (PH 155/001): 1.5-4.5 seconds.
• High-quality natural plaster (TM00 0001): > 89%.
• Short setting time (PH 104/002): 2-3.5 min.
• High stability (PH 105/002): 30 min. ≥ 250 N.
• Mass per square meter (PH 014/005): 370-450 g/m2

Instructions for Use

• Protect the entire area of the body to be treated with suitable padding (synthetic wadding, tube, foam...).
• The product can be cut before being submerged in water.
• The plaster bandage activates after being submerged in water for about 3 seconds at approximately 20°C.
• It should then be completely wrung out and molded immediately. The molding time is approximately 2 to 4 minutes. The setting time is approximately 5 minutes.
• After 30 minutes, it can withstand light loads. After 12-24 hours, the product is fully hardened depending on the number of layers applied.

Warnings

• For use on intact skin only.
• Patients should be warned not to come into contact with excessive moisture by immersion (swimming or bathing).
• Single-use medical device.
• Keep out of reach of children.

Storage

• Store in a cool, dry, and well-ventilated environment.
• Keep at a maximum temperature of 25°C.
• Keep away from direct sunlight.