Sale ONLY to Healthcare Professionals!
  Your Cart
main product photo

Carbide Bur, Cross-Cut - BUSCH

Only %1 left
SKU
-

Busch podiatric tungsten carbide burr with cross-cutting.

HEAD LENGTH: 13 mm (references 14.033.1 and 14.033.2) | 11 mm (reference 14.033.3).

MAXIMUM SPEED: 37,000 rpm (reference 14.033.1) | 25,000 rpm (references 14.033.2 and 14.033.3).

SERRATION: Medium (reference 14.033.1) | Coarse (references 14.033.2 and 14.033.3).

CUTTING STYLE: Cross-cut.

From €20.78
Description

 

CARBIDE BUR WITH CROSS-CUT BUSCH

Tungsten carbide podiatry burs stand out for their high hardness, superior cutting performance, surface finish quality, and great durability. Available in various shapes and tooth designs, they are ideal for specific treatments, allowing continuous cleaning and sterilization without compromising functionality.

 

INDICATIONS FOR USE OF THE PODIATRY BUR:

  • Treatment of thickened, diseased nails and hyperkeratosis.
  • Milling of materials and orthoses.
  • Use on acrylic, gel, and natural nails.
     

TECHNICAL CHARACTERISTICS:

  • MATERIAL: Tungsten carbide.
  • MAXIMUM SPEED: 37,000 rpm (reference 14.033.1) | 25,000 rpm (references 14.033.2 and 14.033.3).
  • NOMINAL DIAMETER: 4.0 mm (reference 14.033.1) | 6.0 mm (references 14.033.2 and 14.033.3).
  • HEAD LENGTH: 13 mm (references 14.033.1 and 14.033.2) | 11 mm (reference 14.033.3).
  • CUT: Cross-cut.
  • TEETH: Medium (reference 14.033.1) | Coarse (references 14.033.2 and 14.033.3).

 

CLEANING AND CARE:

  • Initial preparation:
    - Perform a visual and mechanical check of the bur’s condition.
    - Wash manually with water and neutral soap to remove visible dirt before disinfection.
  • Manual cleaning:
    - Whenever possible, begin with dry removal.
    - If dry cleaning is insufficient, wash with cold pressurized water, ensuring to clean cavities, grooves, and hard-to-reach areas.
    - Use soft plastic bristle brushes if necessary.
  • Disinfection:
    - Immerse the burs in a suitable solution with distilled water and use an ultrasonic bath or tank.
    - Select temperature, time, and program as per the disinfectant product manufacturer's instructions.
  • Drying:
    - Completely dry with a lint-free absorbent cloth or compressed air, especially in cavities and hard-to-reach areas.
  • Sterilization:
    - Depending on the intended use, sterilize in an autoclave, following recommended cycles (minimum 15 minutes at 121 °C or 3 minutes at 134 °C).
    - Post-sterilization storage:
    - Store burs in a clean, dry place away from direct sunlight to maintain integrity and functionality.
    - This procedure ensures the longevity of the burs and their safe use in medical settings.
Customer Reviews