Scalpel Handle Nº3 Black Edition

SCALPEL HANDLE Nº3 BLACK EDITION

The Scalpel Handle No.3 Black Edition stands out for its glossy black finish and smooth texture, making it easy to clean and allowing for quick detection of stains or fingerprints. The new Black Edition range of professional instruments from Herbitas ensures greater durability thanks to a unique surface coating. This coating makes stainless steel harder, reducing the likelihood of deformation. Additionally, it not only enhances appearance but also provides high resistance to corrosion, extending its lifespan.

SCALPEL HANDLE USAGE INDICATIONS:
Professional use for fitting scalpel blades compatible with handle No.3.

TECHNICAL CHARACTERISTICS:

• BRAND: Herbitas | Black Edition.
• MATERIAL: Black Edition stainless steel.
• COLOR: black
• FINISH: glossy
• STERILIZABLE: yes
• WEIGHT: 20 g
• DIMENSIONS: 12 x 1.2 cm (length x width).
• COMPATIBLE SCALPEL BLADES: blades compatible with handle No.3 (scalpel blades No. 11 to 15).
• CONTENTS: Scalpel handle No.3 Black Edition in a plastic sleeve, supplied in non-sterile condition.

STORAGE:

• Store at room temperature in a dry place.
• Protect from heat, intense light, and dust.

WARNINGS:

• Professional use only.
• The instrument must be cleaned, disinfected, and sterilized by the clinician before first use and after each use.
• Check its proper functionality and perfect condition before use.

CLEANING AND CARE:

Initial Recommendations:

• Perform a visual and mechanical inspection of the new surgical instrument.
• Visible dirt should be removed as soon as possible to prevent residues from drying.
• Avoid long waiting times before cleaning and disinfecting the instrument.

Preliminary Manual Cleaning:

• Initially, it should be washed by hand with neutral soap.
• In the operating room, the most apparent dirt should be removed immediately to avoid encrustation that could lead to corrosion.
• It is essential to avoid long waiting times for reprocessing (<1h).
• Dry cleaning is preferable since medical devices may corrode if submerged in solutions for extended periods.
• If dry cleaning is insufficient, they should be washed with cold water (< 40°C), including cavities, grooves, and hard-to-reach holes, which should be washed with pressurized water. Avoid uncleaned areas. A plastic brush with soft bristles can be used.
• Thoroughly dry with an absorbent, lint-free cloth or compressed air.

Cleaning and Disinfection:

• Submerge the instruments in a solution of distilled water with an appropriate disinfectant in an ultrasonic bath or container.
• Follow the manufacturer’s instructions for the disinfectant product to select the washing program, temperature, and duration.
• Clean instruments with movable joints in the open position or by moving the joints to avoid "shadow areas." Follow the manufacturer's instructions for disassembling the instrument if required.
• Instruments should be arranged with minimal spacing in the cleaning container, avoiding overlapping to prevent damage from impacts.
• After the disinfection program, rinse the instruments thoroughly with plenty of cold distilled water, ensuring particular attention to cavities, grooves, and hard-to-reach holes, preferably using pressurized water.
• Thoroughly dry with an absorbent, lint-free cloth or compressed air.

Lubrication:

• Use Sterilit Protector Instrumental (ref. 13.859.1 and 13.859.2) to protect the instruments.
• Attach the provided white plastic tube to the spray and apply the aerosol oil directly to the joint area or hard-to-reach areas.
• Open and close the instrument several times to distribute the oil evenly and remove excess with a lint-free cloth. Then, proceed with sterilization, as the oil film is permeable to steam. It will act as a lubricant and anti-corrosive without leaving stains on the instruments.

Sterilization:

• Sterilize instruments according to applicable national regulations.
• Sterilization should be performed in appropriate sterilization packaging.