Micromotor OZ-400

OZ-400 MICROMOTOR

The OZ-400 induction micromotor is a high-precision device that reaches between 0 and 50,000 rpm with a torque of 7.8 Ncm. Its ergonomic design incorporates a 3rd generation handpiece, new bearings, and a microprocessor that detects incidents, ensuring efficient operation without noise or vibrations. Intended for podiatry, dental, and aesthetic sectors, the OZ-400 guarantees reliable and safe performance in any professional environment.

INDICATIONS FOR USE OF MICROMOTORS
Use in podiatry sector.
Use in dental sector.
Use in aesthetics.

FEATURES:

TORQUE: 7.8 ncm.
RPM: 0 to 50,000 rpm.
VOLTAGE: input 50 hz / output 34 v.
COMPATIBILITY WITH PODIATRY BURS: up to 50,000 rpm (use burs rated for this speed or lower).

HANDPIECE:

• 3rd generation handpiece included.
• Incorporation of new bearings.
• Ergonomic operation.
  

MAINTENANCE:

• Avoid dust and debris entering the motor.
• Clean with a slightly damp cloth.
• No lubricant required.
  

PRECAUTIONS

• Do not disassemble or repair the micromotor, only authorized service.
• Do not damage or cover ventilation slots.
• Do not use with excessive lateral pressure or jam the motor.
• Do not expose to water or use with wet hands.
• Do not use in the presence of flammable liquids or gas.
• Disconnect during storms or long periods of inactivity.
• Disconnect if smoke or strange noises appear.
• Do not change fuse with the device connected.
• Do not open the chuck while running or start with chuck open.
• Do not use wet, damaged, or vibrating burs.
• Always use with bur or accessory installed and chuck closed.
• Observe the maximum recommended speed for each accessory.
• Do not use at maximum speed for more than 5 minutes.
• Always wear eye and face protection.
• Not to be used by minors or non-professional personnel.

WARNINGS

• The induction motor has high torque, use the appropriate speed depending on the bur.
• Use only for the purposes recommended in the manual.
• Do not use accessories not recommended by the manufacturer/distributor.
• Improper use may affect the protection of the device.